Products

URM-S Line Plate Bending Machines
"This mechanical model is designed for light to medium jobs.It is used in jobs up to 8 mm thickness materials. It is used in Aluminium Bendings, Air Conditioning Channels, Advertising Panels and Machine Sheet Metal Cover Parts

" Standard Accessories:
"• Two rolls powered by a single chain and belt driven Helical type Gearbox and gear system
• SAE 1050 (CK 45) Quality Certificated steel rolls with high tensile strength
• Steel welded main frames
• Mechanical manual openable Drop-End
• Mobile control panel
• Conical bending device
• Central lubrication system
• Top roll support system
• Precision bending with brake motor
• Motorised adjustment of back roll
"

UHST-3 Line - Plate Bending Machines
Standards & Advantages of UHST-3
"• High efficiency on heavy plate bending operation
• Reduced overall dimensions and easiness of transportation on medium and big machines
• Having the two bottom rolls horizontally moving, means also a lower working height which requires a smaller foundation pit and less anchoring load (in the smallest models you don’t need foundation)
• During operation (pre-bending and bending phases), the plate always keeps its horizontal position. So material move more easily
• The solid construction and the particular geometry of the UHST-3 enable to be used as a press brake bending machine
• The UHST-3 machine can fulfill the best pre-bending on every required diameter.
• The posibility to reduce centre-distance between lower rolls realizes a better pre-bending during bending of tubes with small diameter and thickness
" "• Another important feature of the UHST-3 machine is the operating system of the top forming roll. In fact, the top forming roll can be used as a traditional press brake allowing perfect rerolling and calibration operations of the produced tubes
• In the same way it is also possible to obtain cones with heavy thickness by bending in several strokes the plate
• With some 3 and 4 rolls pyramidal machines it is necessary to tilt the top roll to allow the produced tube removal. On the UHST-3 machine this is not necessary and therefore it is much more easier to remove the finished tube
• Large working stroke allows to get best bending result
• Can bend more thicker plates compare to equivalent 3 or 4 roll machines
• Induction hardened forged or rolled SAE 1050 (CK 45) Steel Rolls
• Double Speed Working system
• Conical Bending device
• Electronic balancing system
"